Epson TM-U295

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
38 37
ù
The status data transmitted is shown in the following table:
n
= 1: Printer status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
Off 00 0 Drawer kick-out signal is LOW (connector pin 3).2
On 04 4 Drawer kick-out signal is HIGH (connector pin 3).
Off 00 0 On-line.3
On 08 8 Off-line.
4 On 10 16 Not used. Fixed to On.
Off -- -- Undefined.5
On -- -- Undefined.
Off -- -- Undefined.6
On -- -- Undefined.
7 Off 00 0 Not used. Fixed to Off.
n
= 2: Off-line status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
Off -- -- Undefined.2
On -- -- Undefined.
Off 00 0 Paper is not being fed by the paper feed button.3
On 08 8 Paper is being fed by the paper feed button.
4 On 10 16 Not used. Fixed to On.
Off 00 0 No paper-end stop.5
On 20 32 Printing stops due to paper-end.
Off 00 0 No error.6
On 40 64 Error occurs.
7 Off 00 0 Not used. Fixed to Off.
Bit 5: The printer will stop printing and “32” (printing currently stopped) occurs if a
paper-end is detected by TOF or BOF sensor when paper-end printing stop is
selected by
ESC c 4
.