Epson TM-U295

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
39 38
n
= 3: Error status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
Off -- -- Undefined.2
On -- -- Undefined.
Off -- -- Undefined.3
On -- -- Undefined.
4 On 10 16 Not used. Fixed to On.
Off 00 0 No unrecoverable error.5
On 20 32 Unrecoverable error occurred.
Off -- -- Undefined.6
On -- -- Undefined.
7 Off 00 0 Not used. Fixed to Off.
n
= 5: Slip paper status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 Off 00 0 Slip paper selected.
Off 00 0 Does not wait for slip paper insertion.3
On 08 8 Waits for slip paper insertion.
4 On 10 16 Not used. Fixed to On.
Off 00 0 Slip is detected by the BOF sensor.5
On 20 32 Slip is not detected by the BOF sensor.
Off 00 0 Slip is detected by the TOF sensor.6
On 40 64 Slip is not detected by the TOF sensor.
7 Off 00 0 Not used. Fixed to Off.
Bit 3: Switches to “1” (waiting for paper insertion) at the end of current printing
operation, if print stop is selected when paper-end is detected by
ESC c 4
as well
as subsequent print data being present.
Switches to “0” (not waiting for paper insertion) just before actual slip selection
takes place after slip paper is detected.