Epson WF-4820 Series User Manual

55
5. Select your product from the list.
Note: If your product is not listed, move closer to the product and try again. If the product is still not
shown, connect your printer to the wireless network using the control panel and then select Connect
to Existing Product in the Epson Smart Panel app and follow the on-screen instructions. See the
link below for wireless setup instructions.
6. Select Next to select the current wireless network.
Note: If you want to connect the product to a different wireless network, select Change another Wi-
Fi SSID.
7. Enter the password for the wireless network and select OK.
The app starts configuring the product.
Note: Do not move the smart device away from the product during configuration. The product's
control panel may show a successful wireless connection before the process is completed on your
device. Wait for the completion message in the Epson Smart Panel app and do not cancel the
configuration before it is completed.
Your product is now connected to a wireless network and set up for use with the Epson Smart Panel
app.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related tasks
Using the Epson Smart Panel Mobile App
Printing from a Smart Device
Starting a Scan from a Smart Device

Epson WF-4820 Series Specifications

General

Print Resolution	4800 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Automatic Document Feeder	Yes
ADF Capacity	35 sheets
Duplex Printing	Yes
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Weight	20.5 lbs
Print Speed (Black)	25 ppm
Print Speed (Color)	12 ppm
Scanner Type	Flatbed, ADF
Paper Sizes Supported	A4, A5, A6, B5, Letter, Legal, Executive, 3.5 x 5", 4 x 6", 5 x 7", 8 x 10", 8.5 x 11", 8.5 x 14"
Mobile Printing	Apple AirPrint, Mopria, Epson Connect
Ink Cartridges	Black, Cyan, Magenta, Yellow
OS Compatibility	Windows, Mac OS