Epson WF-C879R Series - Page 39

3. Set each item.
4. Click Apply.
5. Click Close.
User Information Setting Items
Item Explanation
User ID Enter the user ID to use authentication between 1 and 83 bytes in Unicode.
Since the User ID is not case sensitive, you can login using upper or lower case
letters.
User name Display Enter the user name displayed on the printer's control panel within 32 characters
in Unicode. You can leave this blank.
Password Enter the password to use authentication within 32 characters in ASCII. The
password is case sensitive.
Leave this blank if you select How to Authenticate User for User ID.
Authentication Card ID
Set the reading result of ID card. When you permit the Allow users to register
authentication cards for Authentication Settings, the result registered by users
is reected.
Enter within 116 characters in ASCII. You can leave this blank.
ID Number
It is displayed when Epson Open Platform or Authentication Settings is
selected on How to Authenticate User tab > Card or ID Number > ID Number.
Enter the number between 4 and 8 digits depending on the digits set on Epson
Open Platform tab > Authentication Settings > The Minimum Digit Number
of ID Number.
Setup & Administration Guide
Information Registration and System Conguration
39