Epson WF-C879R Series - Page 54

See the manual for details on the settings.
Related Information
& “Registration for the User Information (Web Cong)” on page 38
& “About Email Notications” on page 96
Making Scan to My Folder Settings (Web
Cong
)
Set the Scan to My Folder function by using Epson Print Admin Serverless. You can set the following save
destinations using the Scan to My Folder function.
Set Destination Target Authentication Method Destination Path
User folder Each user Local DB, Local DB and
LDAP
Contacts
User folder Each user LDAP, Local DB and LDAP LDAP attribute
Shared folder
*
All users Local DB, Local DB and
LDAP
Device (setting for the Scan
to My Folder function)
* : A folder named after the user's ID is automatically created immediately below the specied folder path or URL.
1. Select the Epson Print Admin Serverless Setting List > Epson Print Admin Serverless > Scan to Network
Folder/FTP.
Or access Epson Open Platform tab > Epson Print Admin Serverless > Scan to Network Folder/FTP.
Setup & Administration Guide
Information Registration and System Conguration
54