Epson WF-C879R Series - Page 58

5. Select the function you want to display on the line with the same number as the number at the position where
you want to display the icon.
6. Click OK.
Making Pull Printing Settings (Web
Cong
)
You can make settings to print from any printer by linking to the printer using Epson Print Admin Serverless.
You can register up to four slave printers for a master printer that sends print data from the user's computer. You
cannot register additional slave printers from the slave printer.
c
Important:
e
following environment is necessary for linked printers.
❏ Epson Print Admin Serverless is available.
❏ Pull Printing is supported.
❏ Epson Print Admin Serverless settings are set to the same values.
Linking the Printer (Web Cong)
1. Select Epson Print Admin Serverless Setting List > Epson Print Admin Serverless > Pull Printing.
Or access the Epson Open Platform tab > Epson Print Admin Serverless > Pull Printing.
2.
Set the linked printer from 1: to 5:.
Note:
Be sure to include the printer that is currently set.
Setup & Administration Guide
Information Registration and System Conguration
58