Epson WF-C879R Series - Page 57

You can set it from the Epson Print Admin Serverless Setting List > User Default Settings > Scan to Network
Folder/FTP or Scan/Copy > User Default Settings > Scan to Network Folder/FTP.
Item Explanation
Prohibit manual entry of destination When enabled, the user cannot change the default destination.
Editing the Home Screen (Web
Cong
)
You can display only necessary icons by editing the icon layout displayed on the home screen for the control panel.
1. Select Epson Print Admin Serverless > Customize One-touch Functions from Epson Print Admin
Serverless Setting List.
Or access the Epson Open Platform tab > Epson Print Admin Serverless > Customize One-touch
Functions.
2. Select Enable from Customize One-touch Functions.
3. Select the layout of the icons displayed on the control panel from Maximum functions per screen. e image
changes according to the selected layout.
c
Important:
In the following cases, icons for the
specied
functions are not displayed on the home screen.
❏ When you select functions that are not permitted due to user restrictions.
❏ When the email address for a logged in user is not registered. (Scan to My Email)
❏ When the destination folder is not set. (Scan to My Folder)
4. Select the screen number from Screen(s).
Setup & Administration Guide
Information Registration and System Conguration
57