Lights Problem and solution
Fatal error
An unknown product error has occurred. Turn off the product. Then, remove the jammed
paper.
& “Paper Jams” on page 119
Then turn the product back on. If the error does not
clear, contact your dealer.
Wi-Fi network error
An error occurred while establishing the Wi-Fi
connection.
Press the Wi-Fi button to clear the error and try again.
For more details, see the online Network Guide.
Recovery mode
The firmware update has failed, and the product
is in recovery mode.
You will need to re-attempt the firmware update.
Ready a USB cable and visit your local Epson website
for further instructions.
= on, = flashing slowly, = flashing fast
User’s Guide
Error Indicators
114
To Next Page
Loading...
Need help?
General
