eqss Gen-3 LMS - User Manual

EQUIPMENT SAFETY SYSTEMS PTY LTD
eqss™ Gen-3 LMS
Telehandler Load Management System
Installation Manual for T40180 – 2022 Model
DO001547 VER: 2303241610
***Failure To Follow Installation Manual Will Void Warranty***
***Do Not Swap Components between Gen3-LMS kits***
When installing multiple Gen3-LMS kits, make sure the serial number
on the sticker matches the serial number on the machine.

Summary

Tools Required for Installation

Installation Index

Covers

Cable Reeler Installation

Cable Reeler Mounting Position

Pressure Sensor Installation

Pressure Manifold

Details the installation of the pressure manifold and connecting pressure sensors to the main lift cylinder.

Compensation Pressure Sensors

Can Pressure Input Module (CPIM)

Signal Light Installation

Forward Camera

External Cable Completion

Display Installation

User Control

Can Cabin Interface Module (CCIM)

Machine Connections

Cabin Loom

Finalisation

Set Time & Sensor Calibration

Schematics

CPIM Connections Gen3-LMS Schematics

Gen3-LMS Machine Connection Schematics

Appendix A: Attaching Display Connectors

Appendix B: Reattach Ferrites

Indexes and Tables

eqss Gen-3 LMS Specifications

General

Manufacturer	eqss
Model	Gen-3 LMS
Category	Control Systems
Input Voltage	24 VDC
Output Voltage	0-10V DC
Communication Protocol	Modbus RTU