Ericsson iPECS LIP-8002E - Network Config

LIP-8008E User Guide
44
7.9 Network Config.
The user can review the current network configuration
or modify a new phone network configuration.
To access Network Config. Settings:
• Press TRANS/PGM button and Dial 78(iPECS-LIK)/38(iPECS
SBG-1000)/80(iPECS-MG),
• Enter the password (default=147*), the following will display:
• MFIM #[1/2] ?
• MFIM #1 –
CHANGE[#]
• Press the # key to toggle between multiple profiles (MFIM),
• Press the VOL ▲ VOL ▼ buttons to advance to the next
network configuration item,
• Press the HOLD/SAVE button to save each setting.
To set default Config settings:
• In Network Config. Menu, use the VOL ▲ VOL ▼ buttons to
locate the Default Config Screen (shown),
Set default – [*]
• Press the * key.
To exit Config. Settings:
• Press SPEAKER,
• Press the * key to exit,
OR
• Press the # key to Reset/Reboot the phone with new settings.