LIP-8040E Gigabit Phone User Guide
38
4.3.3 Using System Speed Dial Numbers
The iPECS SBG-1000 & Micro & 50 & 100 system has
memory allocated for 800 System Speed Dial numbers
(bins 200-999). The iPECS-300 system has memory
allocated for 3000 System Speed Dial numbers (bins
2000-4999). The iPECS-600 system has memory
allocated for 6000 System Speed Dial numbers (bins
2000-7999). The iPECS-1200 system has memory
allocated for 12000 System Speed Dial numbers (bins
20000-31999).
The iPECS-MG100 system has memory allocated for
1000 System Speed Dial numbers (bins 2000-2999).
The iPECS-MG300 system has memory allocated for
2000 System Speed Dial numbers (bins 2000-3999).
You may, if allowed, use System Speed Dial to call
frequently dialed numbers.
In some cases, these numbers are divided into groups
called System Speed Zone Groups. In this case, you
may access some numbers and not others and your
dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial
numbers.
4.3.4 Using and Entering Station Speed Dial Numbers
Each station in the iPECS SBG-1000 & 50 & 100
System is allocated memory for 20 Station Speed Dial
numbers (bins 00-19) each up to 23 digits. The iPECS-
300 & 600 & 1200 support 100 Station Speed Dial
numbers (bins 000-099). The iPECS-MG 100 & 300
each support 50 Station Speed Dial numbers (bins
000-049). These numbers are entered at the user’s
To place a call using System Speed Dial:
• Lift the handset,
• Press the DIR Soft button,
• Press the speed button(iPECS-LIK & SBG)/Dial 2 for
System Speed(iPECS-MG),
• Dial the desired System Speed Dial bin number (200-
999 for iPECS SBG-1000 & Micro & 50 & 100, 2000-
4999 for iPECS-300, 2000-7999 for iPECS-600, 20000-
31999 for iPECS-12000 ,2000-2999 for iPECs-MG100 ,
or 2000-3999 for iPECS-MG300).
To Next Page
Loading...
