LIP-8040E Gigabit Phone User Guide
40
4.3.5 Using Dial by Name and Entering Your Name
Dial by Name employs three different Directories:
Private directory (Station Speed dial), Public Directory
(System Speed dial), or Intercom directory.
NOTE—To allow others to contact you via the Intercom
directory, you must enter a name for your station (up to
12 characters).
To place a call using Station Speed Dial:
• Lift the handset, and/or press the DIR Soft button,
• Press the Speed Soft button(iPECS-LIK & SBG)/Dial ‘1’ for
station speed(iPECS-MG),
• Dial the desired Station Speed Dial bin number (00-19 or 000-
099 or 000-049).
To enter a Station Speed Dial number with CO Line and Name:
• Lift the handset, and/or press the DIR Soft button,
• Press the Speed Soft button(iPECS-LIK & SBG)/Dial ‘1’ for
station speed(iPECS-MG),
• Press the ADD Soft button,
• Dial the desired Station Speed Dial bin number,
• Select/dial the CO/IP line/group, (Skip this step in iPECS SBG-
1000)
• Dial the desired number to be stored,
• Press HOLD/SAVE,
• Enter the associated name if desired, using the Character Entry
Chart,
• Press HOLD/SAVE.
To assign a Station Speed Dial number directly to a Flex button:
• Press TRANS/PGM,
• Press the desired Flex button,
• Select the Tel Num Soft button(iPECS-LIK)/Dial ‘1’ for
Number(iPECS-MG),
• Select/dial the CO/IP line/group, (Skip this step in iPECS SBG-
1000)
• Dial the desired number,
• Press HOLD/SAVE,
• Enter the associated name if desired, using the Character Entry
chart(iPECS-LIK),
• Press HOLD/SAVE.
To Next Page
Loading...
