Ericsson iPECS LIP-8002E - Call Park: Placing a Call on Hold to Page; Two-Way Record: Recording a Call

LIP-8012E & LIP-8024E Gigabit Phone User Guide
45
5.5 Call Park: Placing a call on Hold to Page
A user may transfer an active CO/IP call to a special
holding location (Park Orbit), which can be accessed
easily from any station in the system. Typically, this
feature is used with Paging to notify the desired user of
a parked call.
Parked calls are subject to Hold Recall after the Call
Park timer.
5.6 Two-Way Record: Recording a call
You may record an active external conversation in your
Voice Mail Box.
In iPECS-LIK & iPECS SBG-1000
To park an active external call:
• Press TRANS/PGM,
• Dial the Park Orbit (601-610 for iPECS SBG-1000 & 50 & 100,
601-619 for iPECS-300 & 600 or 601-800 for iPECS-1200),
• Return to idle.
To retrieve a parked call:
• Lift the handset,
• Dial the Park Orbit.
To activate Two-Way Record while on a CO/IP call:
• Use the Navigation button to display the next Menu and select
the Record
Soft button, record warning tone is heard and
recording starts.
To stop Two-Way Record while on a CO/IP call:
• Use the Navigation button to display the next menu, and select
the Record
Soft button or,
•
Hang-up, return to idle.
In iPECS-MG
To park an active external call:
• Press TRANS/PGM,
• Dial the Park Orbit (541),
• Dial the Park number (00-49)
• Return to idle.
To retrieve a parked call:
• Lift the handset,
• Dial the Park Orbit (541),
•
Dial the Park number (00-49)