LIP-8008E User Guide
47
9. Set Features & Flex Buttons
9.1 Entering Station Program Data
A special code set is available for iPECS Phone users
to assign certain attributes such as Authorization Codes
(Passwords). After entering the User Program mode,
dial the codes to select the attribute and setting. Once
selected, the setting is saved. A list of the User
Program codes, the feature/function and any input
required are given in
Appendix B.
9.2 Assigning Features to Flex Buttons
You may assign features and functions to the Flex
buttons on your iPECS Phone. If allowed, you may
even assign CO/IP lines to the Flex buttons.
Flex buttons may be assigned for most features
providing One-Touch feature activation (e.g., a Flex
button may be assigned to access the Account Code
feature and may include the Account code digits, as a
one-touch account code button).
Features that may be assigned to a Flex button include:
DSS/BLF—Enter station number.
Speed Dial—Enter Station/System Speed dial bin
number.
Flex Numbering Plan—Enter Flex Numbering Plan
code (refer to Appendix A).
User Program Code—Press TRANS/PGM and enter a
User Program code (refer to Appendix B).
CO/IP Line—Enter the CO/IP line or group number.
To assign User Programmable station attributes:
• Press TRANS/PGM,
• Dial desired User Program codes shown in Appendix B,
• Press HOLD/SAVE.
To assign a feature to a Flex button:
• Press TRANS/PGM,
• Press the desired Flex button,
• Dial desired code and required inputs. For User Program
codes, first press the TRANS/PGM,
• Press HOLD/SAVE.
Features &
To Next Page
Loading...
