Ericsson iPECS LIP-8002E - Setting up a Conference Room

LIP-8008E User Guide
31
4.4.1 Setting up a Conference Room
In addition to establishing a Conference, up to 9
Conference Rooms can be set up, letting up to 32
parties converse when using a MCIM. When setting up
a Conference Room, a password can be designated for
invited parties (internal and external parties) to use for
accessing the established Conference Room.
To retrieve the Conference from Hold:
• Press the CONF button.
To establish an Unsupervised Conference:
• Establish conference with two external parties,
• Press the CONF button.
• Hand-up handset.
•
To retrieve an Unsupervised Conference:
• Lift the handset,
• Press the CONF button
In iPECS-LIK
To set-up a Conference Room:
• Press the TRANS/PGM button,
• Dial 53 to create a Conference Room,
• Dial the desired Conference Room number (1-9),
• If desired enter a password for the Conference Room (up to 12
digits),
• Press HOLD/SAVE to establish the Room.
To join a Conference Room:
• Press the TRANS/PGM button,
• Dial 59 (Conference Room entry code),
• Dial the Conference Room Number,
• Dial the Conference Room password.
To delete a Conference Room:
• Press the TRANS/PGM button,
• Dial 54 (delete Conference Room code),
• Dial the Conference Room number (1-9),
• Dial the Conference Room password,
• Press HOLD/SAVE to delete the Conference Room.