LIP-8002E/2AE User Guide
26
4.3 Joining multiple people in a Conference
You can establish a Conference with up to 3 parties, 32
parties when using a MCIM (iPECS-LIK) or 128 parties
when using a Multi-Party Conference Interface Module
(VPCM). The other parties in the Conference may be
internal or external.
A Conference can be placed on Hold and is subject to
Hold Recall.
You may also use the Conference operation to join 2
external parties in a private conversation. This is an
Unsupervised Conference, which is not subject to the
normal Hold Recall operation.
A CONF button should be programmed at first.
In iPECS-LIK, iPECS SBG-1000
To establish an Conference:
• Establish first call,
• Press the assigned CONF button. The connected party is
placed on exclusive hold and the user receives dial tone,
• Place second call,
• When connected, press the assigned CONF button, new call is
placed on exclusive hold,
• Press the assigned CONF button to establish conference.
To set up an Unsupervised Conference:
• Establish normal conference,
• Press the assigned CONF button.
To retrieve an Unsupervised Conference:
• Lift the handset,
• Press the assigned CONF button.
4.3.1 Setting up a Conference Room
In addition to establishing a Conference, up to 9
(iPECS-LIK) Conference Rooms can be set up, letting
up to 32 parties converse when using a MCIM or up to
128 parties converse when using a VPCM. When
setting up a Conference Room, a password can be
designated for invited parties (internal and external
parties) to use for accessing the established Conference
Room.
To Next Page
Loading...
