Ericsson iPECS LIP-8002E - Getting Voice Mail Messages

LIP-8012E & LIP-8024E Gigabit Phone User Guide
47
6.2 Getting Voice Mail Messages
When callers are forwarded or recall to your Voice Mail
Box, they can leave a voice message. Your Voice Mail
Box is part of the integrated VMIM/VSF/VMIB module,
the iPECS Feature Server or an external Voice Mail
system.
The Voice Mail system allows access to and
management of received voice messages. While in
your Mail Box, you have control of your password and
Mail Box greeting. In addition, you can remotely control
Call Forward for your station from the VMIM/VSF/VMIB.
You will need to register an Authorization Code for your
station to access the VMIM/VSF/VMIB Voice messages.
To retrieve Voice Mail locally using a Flex button:
• Press the programmed VOICE MAIL Flex button,
• Dial your Mail Box number and corresponding password to
receive the ‘Number of Messages’ prompt,
• Dial desired option codes,
• At completion of session, hang-up to return to idle.
To retrieve Voice Mail locally using the MSG button:
• Press the flashing MSG button, the LCD shows the Message
Summary display:
1. ICM MWI(002)
2. VSF MSG(002)
3. VMS MSG(001)
BACK OK
• Press the Navigation down key, to display additional items:
4. UMS MSG(003)
5. ICM SMS(003)
BACK OK
• Dial 2 for VMIM/VSF, 3 for external VM or 4 for Feature Server
Voice Mail,
• After the prompt enter your station number and password,
• Dial desired option codes,
• At completion of session, hang-up to return to idle.