Ericsson iPECS LIP-8002E - Phone Setting

LIP-8040E Gigabit Phone User Guide
8
NOTE—The ‘0. Attendant’ selection will only
display on the System Attendant phone.
In iPECS-LIK
To activate the Display Menu:
• Press MENU button,
• Press the Navigation up/down buttons and press the OK Soft
button to select,
OR
• Dial the associated digit (Menu selections shown):
SELECT (0 - 4)
1. PHONE SETTING
2. CONFERENCE ROOM PGM
3. ICM SMS
4. NETWORK CONFIG
0. ATTENDANT
BACK OK
In iPECS SBG-1000
To activate the Display Menu:
• Press MENU button,
• Press the Navigation up/down buttons and press the OK Soft
button to select,
OR
• Dial the associated digit (Menu selections shown):
SELECT (1 - 2)
1. PHONE SETTING
2. NETWORK CONFIG
BACK OK