LIP-8040E Gigabit Phone User Guide
16
2.3 Using the Speakerphone
Activate the iPECS Speakerphone at any time (except
for Paging) in place of lifting the handset to receive or
place calls.
Additionally, you may switch between the handset and
Speakerphone during a call. By keeping the handset
Off-hook, the Group Listen feature is activated, which
provides incoming audio over the speaker with outgoing
audio from the handset. This permits a local ‘group’ to
listen to both sides of the conversation without
interfering with the conversation.
While in a conversation using the Speakerphone, Mute
the microphone using the M
UTE button. When Mute is
active, the MUTE button LED will be illuminated. To turn
off Mute, press the MUTE button again.
With Auto Speaker Select, activating or accessing a
feature by pressing its button will activate the
Speakerphone automatically.
In iPECS SBG-1000
To access the Attendant menu:
• From the Attendant Station phone, press the MENU
button,
• Press 0 (Attendant); the following will display:
SELECT (1 - 2)
2. RESTORE COS
BACK OK
• Set ICM Only Mode—Dial the Station Range for ICM
only calls (ex., 103-108=103108), and press the OK
Soft button.
• Restore COS—Dial the Station Range for COS
restoring (ex., 103-108=103108), and press the OK
To Next Page
Loading...
