LIP-8012E & LIP-8024E Gigabit Phone User Guide
60
ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all message
waiting)
Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x
NOTE—only activated features are announced.
8.10 Hot Desk
iPECS phones in the system may be assigned for Hot
Desk operation. These Hot Desk phones let you log-on
and use the Hot Desk phone as if it were your station.
Once logged-on, the Hot Desk station will take on the
attributes assigned to your station number and you can
make calls as normal. When logged-out, calls to your
station number are forwarded to the chosen destination.
To hear Date & Time memo:
• Dial the Voice Memo code (661 for iPECS-50 & 100, *661 for
iPECS-300 & 600 & 1200, or 675+1 for iPECS-MG),
• Date and Time memo is heard, “Date is May 2nd.Time is xx:xx
pm”.
To hear Station Number Prompt:
• Dial Voice Memo code (662 for iPECS-50 & 100, *662 for
iPECS-300 & 600 & 1200, or 675+2 for iPECS-MG),
• The Station Number memo is heard, “This is station 150”.
To hear Station Settings:
• Dial Voice Memo code (663 for iPECS-50 & 100, *663 for
iPECS-300 & 600 & 1200, or 675+3 for iPECS-MG),
• Station Status Memo is heard.
To Next Page
Loading...
