Ericsson iPECS LIP-8002E - Differential Ring Signals

To Next Page

To Previous Page

LIP-8012E & LIP-8024E Gigabit Phone User Guide

3.4 Differential Ring Signals

When multiple phones in a small area ring, it can be

difficult to tell which are ringing. The iPECS Phone has

14 Ring Tones available for differentiating one phone’s

ringing from another. Four of the tones are stored in the

phone permanent memory; the remaining ten tones are

in the system memory. Four of these ten can be

downloaded into the phone memory for use as the 5

Ring Tone.

In iPECS-MG

To download a Ring Tone from System memory:

• Press TRANS/PGM,

• Dial 2 for Ring Tones,

• Dial 3 for Ring Tone download,

• Dial the phone’s memory location to receive the tone (5-8),

• Dial 0-9 for the desired tone number; a confirmation tone is heard,

• Press HOLD/SAVE to download.

To select a Ring Tone from phone memory:

• Press the TRANS/PGM button,

• Dial 2 for Ring Tones,

• Dial 1 or 2 for Internal or External ring,

• Dial 1 for Keyset Ring Source,

• Dial 1-8 for the desired tone number; a confirmation tone is heard,

• Press HOLD/SAVE to make the selection.

In iPECS-LIK