LIP-8012E & LIP-8024E Gigabit Phone User Guide
20
Speaker Mode (iPECS-LIK & SBG)/Speaker Hearing
Mode (iPECS-MG)—when the call is sent to the voice
mailbox, the caller’s voice is automatically broadcast
over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice
mail to record a message, talk with the caller and record
the conversation in the mailbox, or answer the call and
disconnect the Voicemail. The AME feature is only
available when using the iPECS VMIB Voice Mail; a
MUTE and AME button should be programmed (refer to
Appendix A User Program Codes).
To screen a call in Ring mode (iPECS-LIK & SBG)/LED blink
mode (iPECS-MG):
• Press the flashing AME button, the caller’s voice is broadcast over
the station speaker and stored in the voice mailbox (in the Speaker
hearing mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:
• Press the illuminated SPEAKER button.
To talk with the caller and record the conversation in Voice
Mail:
• Press the MUTE button.
To answer the call and cancel the voice message recording:
• Press the illuminated AME button, the caller is connected and the
Voice Mail disconnected.
To Next Page
Loading...
