Ericsson iPECS LIP-8002E - Page 135

LIP-8012E & LIP-8024E Gigabit Phone User Guide
9
2.1.1 Phone Setting
In iPECS-MG
To activate the Display Menu:
• Press MENU button,
• Press the Navigation up/down buttons and press the OK Soft
button to select,
OR
• Dial the associated digit (Menu selections shown):
1. PHONE SETTING
2. NETWORK CONFIG
BACK OK EXIT
In iPECS-LIK & iPECS SBG-1000
To configure the Phone:
• Press MENU button and 1 (Phone Setting),
• The following menu displays:
1. STATION NAME PROGRAM
2. ICM RING
3. CO RING
BACK OK
4. PASSWORD PROGRAM
5. LANGUAGE PROGRAM
6. STA RING DOWNLOAD
•
BACK OK
7. BACKLIGHT
8. FONT PROGRAM
BACK OK
• Station Name Program—Input up to 12 digits using the keypad
(press DND button to backspace/delete a character), then press the
OK Soft button. To input characters:
• Press the second Soft button to select ABC> or abc> mode,
• To input the first character of a button, press the button 1 time (ex., for
‘a’, press 2 button once),
• To input the second character of a button, press the button 2 times
(ex., for ‘b’, press the 2 button twice.
• To input the third character of a button, press the button 3 times (ex.,
for ‘f’, press the 3 button three times.