LIP-8002E/2AE User Guide
11
In iPECS-MG
To activate Call Forward, Off Premise (forward to an external
number) from your phone:
• Press SPEAKER on and DND button,
• Dial the type of forward code 1-4,
1= Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer,
• Dial Telephone number,
• Replace the handset, return to idle.
To activate Call Forward, Off Premise (forward to an external
number) from a different phone:
• Press SPEAKER on and DND button,
• Dial 0 (Remote Call Forward code),
• Dial your Authorization Code (Station number & Password),
• Dial the type of forward code 1-4,
1= Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer,
• Dial Telephone number,
•
Replace the handset, return to idle.
2.6.3 Forwarding callers to a Text Message
Using an iPECS Phone, the system can be setup to
return a ‘Text Message’ to callers. When calling your
Station, Internal callers will automatically receive the
selected message or you can send a text message you
select in response to an internal call, Silent Text
Message.
There are 11 Custom Display Messages each up to 24
characters. Ten can be assigned by the Attendant and
one assigned by you, see Station Speed Dial Character
entry chart.
In addition, there are ten fixed Pre-defined Text
Messages; some allow auxiliary input for time, date, etc.
(as shown in message list).
Message 1: LUNCH RETURN AT hh:mm
Message 2: ON VACATION
RETURN AT DATE mm:dd
Message 3: OUT OF OFFICE
RETURN AT TIME hh:mm
Message 4: OUT OF OFFICE
To Next Page
Loading...
