LIP-8012E & LIP-8024E Gigabit Phone User Guide
52
NOTE—The mobile may reconnect to the transfer
call by pressing the # key.
In iPECS-LIK & iPECS SBG-1000
To register a mobile phone number: (iPECS-LIK)
• Press the TRANS/PGM button,
• Dial 37,
• Dial the mobile phone number,
• Press the HOLD/SAVE button.
To activate a registered mobile phone: (iPECS-LIK)
• Press the TRANS/PGM button,
• Dial 38,
• 1 to activate, 0 to deactivate,
• Press the HOLD/SAVE button.
To place a call from the mobile extension using the
iPECS System:
• Dial the ISDN DID number of the station; the system will check
the Caller ID and answer the call. The user then will receive
intercom dial tone,
• Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the
iPECS:
• Dial “*” while on an iPECS call,
• Dial the desired extension, the call is transferred and the
mobile phone returns to idle.
To Next Page
Loading...
