LIP-8040E Gigabit Phone User Guide
19
In iPECS-LIK
To use a Serial DSS:
• Verify the Station has Serial DSS Usage authority
(Admin PGM111-Flex21),
• Verify the DSS power is OFF (LIP-8048DSS only),
• Power-OFF the phone,
• Connect the serial DSS to the phone,
• Power-ON the phone and the DSS (LIP-8048DSS only),
• Program the DSS button using Web Admin
Programming or PGM115,
• Edit LSS label from Admin PGM129 (default label is
provided from MFIM).
To initialize Serial DSS Database:
• Enter Admin PGM111-Flex21,
• Select Station range to clear Serial DSS Database,
• Dial 0, and press the HOLD/SAVE button.
In iPECS-MG
To use a Serial DSS:
• Set the Station’s Serial DSS Usage Map (Admin
PGM120-Flex2),
• Verify the DSS power is OFF (LIP-8048DSS only),
• Power-OFF the phone,
• Connect the serial DSS to the phone,
• Power-ON the phone and the DSS (LIP-8048DSS only),
• Program the DSS button using Web Admin
Programming or PGM126,
• Edit LSS label from Admin PGM126.
To initialize Serial DSS Database:
• Clear the Station’s Serial DSS Usage Map (Admin
PGM120-Flex2),
• Admin PGM120-Felx3 to reset the phone.
To Next Page
Loading...
