Ericsson iPECS LIP-8002E - 4. Call Handling; 4.1 Call Transfer: Sending a call to a different destination; 4.2 Call Hold: Placing a call in a waiting state

LIP-8002E/2AE User Guide
20
3.3 Using Automated Dialing
3.3.1 Using Last Number Redial (LNR)
The last number dialed on an external call is
automatically saved in the Last Number Redial (LNR)
buffer.
In iPECS-LIK, iPECS SBG-1000
To dial the Last Number for an external call:
• Dial Last Number Redial code
Or
• Press SPEED button and ‘*’,
• Use Vol Up/Vol Down or Navigation buttons to select the
desired number,
• Press HOLD.
In iPECS-MG
To dial the Last Number for an external call:
• Dial Redial code
Or
• Press SPEED button and ‘*’.
3.3.2 Using and Entering Saved Number Dial
You may store the last number dialed on an external call
to the Saved Number Dial buffer for convenient dialing
at a later time. The Saved number is stored until a new
number is saved.
In iPECS-LIK, iPECS SBG-1000
To place a call using Saved Number Dial:
• Lift the handset,
• Press SPEED.
• Dial #
To store a number in the Saved Number Dial:
• While on an outgoing external call, press SPEED twice.