LIP-8040E Gigabit Phone User Guide
52
In iPECS-MG
To send an SMS message to another iPECS display Phone:
• Press the TRANS/PGM button,
• Dial 43 (SMS send code),
• Dial the station number to receive the message,
• Press the Add Soft button to append the next station number
and Dial the station number,
• Press the Finish Soft button,
• Enter your mssage (refer to Character Entry Chart(iPECS-MG)
in Section 4.3.4),
• Press HOLD/SAVE to send your message.
To view your received Short text messages:
• Press the Msg Soft button, the LCD will display the Message
Summary display,
ENTER (MWI:1, VMS:2, SMS:3)
• Dial 3 to view the SMS message.
• Press the Next Soft button to view the next SMS message.
To delete received Short text messages:
• Press the Delete Soft button.
To view your received Short text messages:
• Press the MSG button, the LCD will display the Message
Summary display:
1. ICM MWI(002)
2. VSF MSG(002)
3. VMS MSG(001)
4. UMS MSG(003)
5. ICM SMS(003)
• Dial 5; the first few SMS messages are shown in brief,
• Dial the Message number to view the entire SMS message.
To delete received Short text messages:
• Press the DELETE Soft button,
• Dial 1 to Delete the message, 2 to Cancel, or 3 to Delete all
received Short text messages.
To Next Page
Loading...
