Ericsson iPECS LIP-8002E - Appendix A User Program Codes

LIP-8002E/2AE User Guide
30
and password) for your station to access
VSF/VMIM/VPCM Voice messages.
In iPECS-LIK, iPECS SBG-1000
To retrieve Voice Mail locally using a Flex button:
• Press the assigned VOICE MAIL Flex button,
• Enter the authorization code(station number and password);
the “Number of Messages” prompt is played,
• Dial desired option codes,
• At completion of session, hang-up to return to idle.
To retrieve Voice Mail locally:
• Press CALL BACK, either the message contents summary is
shown or the number of voice mails is shown,
• If the message contents summary is shown, dial ‘3’ (iPECS-
LIK) / ‘2’ (iPECS SBG-1000) to select VSF messages,
• Press CALL BACK,
• After the prompt enter your station number and password,
• Dial desired option codes,
• At completion of session, hang-up to return to idle.
To access Voice Mail Box from a Remote Location:
• Lift the handset,
• Dial the telephone number of a CO line assigned for answer
by the VSF Auto Attendant,
• Upon answer, dial ‘#’, “Enter your password” prompt is played,
• Enter the Authorization code(station number and password),
• Dial desired option codes,
• At completion of session, hang-up.
In iPECS-MG
To retrieve Voice Mail locally:
• Press CALL BACK,
• After the prompt enter your station number, password,
• Dial desired option codes,
• At completion of session, hang-up to return to idle.