Ericsson iPECS LIP-8002E - Page 43

LIP-8002E/2AE User Guide
37
To log-out of the PTT group(s):
• Dial the PTT Log-in/out code.
• Press the * key.
To place a page to the active PTT group:
• Press and hold the PTT button.
• After confirmation tone make page announcement.
To assign a PTT Flex button:
• Press TRANS/PGM,
• Press the flexible button to be assigned.
• Dial ‘99’
• Press HOLD.
In iPECS-MG
To log-in to a PTT group:
• Dial the PTT Log-in/out code.
• Dial the desired PTT group number (1-9, 0 ).
To log-out of the PTT group(s):
• Dial the PTT Log-in/out code.
• Press the * key.
To place a page to the active PTT group:
• Press and hold the PTT button.
• After confirmation tone make page announcement.
To assign a PTT Flex button:
• Press TRANS/PGM,
• Press the flexible button to be assigned.
• Press program type 1 (1: Fixed button, 2: Number, 0:Delete)
• Choose the button type as PTT using VOL ▲▼ ,
• Press HOLD.
7.4 Wake-Up Alarm
iPECS supports an Alarm Clock for each station. You
can set the alarm clock to repeat daily or as a one-time
alarm.