LIP-8008E User Guide
38
NOTE—The mobile extension may reconnect to the transfer call by
pressing the mobile flash digit(*).
In iPECS-MG
To register a mobile phone number:
• Press the TRANS/PGM button,
• Dial 51,
• Select Mobile Index 1 or 2,
• 1 to activate, 0 to deactivate,
• Press the HOLD/SAVE button.
To activate a registered mobile phone from the user’s station:
• Press the TRANS/PGM button,
• Dial 52,
• Select Mobile Index 1 or 2,
• Dial the mobile phone number with CO Access code,
• Press the HOLD/SAVE button.
To place a call from the mobile extension using the iPECS System:
• Dial the ISDN DID number of the station; the system will check
the Caller ID and answer the call. The user then will receive
intercom dial tone,
• Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
• Dial the mobile flash digit “*” while on an iPECS call,
• Dial the desired extension, the call is transferred and the
mobile phone returns to idle.
To Next Page
Loading...
