EasyManua.ls Logo

Ericsson MC 218 - Inserting a Photo from a Digital Camera; Inserting an Image from a File

Ericsson MC 218
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Postcard 154
You can insert a picture into your postcard by transferring it from a digital
camera.
To insert a photo from a camera:
Note! Postcard only supports infrared transfer from IrTran-P compatible
cameras.
1. With a postcard opened, tap Insert on the toolbar on your MC 218 and
select From camera.
When infrared communication is initialised, a dialog box with a progress
bar appears.
2. Select the photo you wish to transfer in the camera.
3. Press Send/Transfer (depending on camera type) on the camera and place
the camera so that the two infrared ports are facing each other.
When the photo has been transferred, it is inserted into the postcard.
Note! If any errors occur when initializing or transferring, there will be no
progress for some time. Tap Cancel and try again.
Note! If there is not enough memory to convert the image to Postcard format,
an error message will be displayed.
You can choose to store the image either in Postcard format or in its original
size. In Postcard format, the image is resized to save memory and this enables
quick transfer when a postcard is sent as e-mail. The original image format
requires more memory and takes longer to send. However it is viewable in its
original size when receiving e-mail on a desktop computer. Saving an image
in its original size requires up to 400 kB of storage memory (based on a
resolution of 1280 x 1024 pixels).
To toggle between image formats:
On the Tools menu, enable or disable Original image size before you
transfer the image to your MC 218.
Note! It is not possible to draw on an image in MC 218 when it is in its
original size format.
You can insert a JPEG image stored on your internal MC 218 disk to your
postcard.
To insert an image stored on the disk drive:
1. With a postcard opened, tap Insert on the toolbar and select From file.
2. In the Insert image dialog box, enter name and location of the image file
you want to insert and tap OK. You can also browse to the file location.
The image is inserted into the postcard.
INSERTING A PHOTO FROM A DIGITAL CAMERA
INSERTING AN IMAGE FROM A FILE

Table of Contents

Other manuals for Ericsson MC 218