Sketch 184
When you use Sketch for the first time, you will see a blank screen. When you
run Sketch at other times, the last sketch you created is automatically opened
so that you can continue working.
To start a new sketch file:
• Use the command on the File menu.
To return to a different sketch file:
• Open the file using the command on the File menu.
The current file is saved each time you exit Sketch. You can also use More on
the File menu to:
• save the file at any other time using Save, or give it a different name using
Save as.
• reject all changes made to a file since it was last saved using Revert to
saved.
SKETCH FILES
To Next Page
Loading...