41 Ericsson EPOC Connect
To prepare for Ericsson EPOC Connect:
1. Plug the larger connector on the docking cable into your PC COM port,
and the smaller one, with the connection symbol facing downwards, into
the serial port on your MC 218.
2. On your MC 218, select Remote link on the Tools menu on the Desktop
screen.
3. Set Link to Cable, Baud rate to 115200 and tap OK or press Enter.
4. On your PC, start the My Ericsson program and Ericsson EPOC Connect
automatically connects to your MC 218 and displays icons representing its
disks.
Note! Usually, it does not matter which COM port on your PC you use to
connect to your MC 218. Ericsson EPOC Connect quickly checks each port in
turn to find a connected MC 218. See the “Troubleshooting” chapter if
connection problems arise.
Finding Ericsson EPOC Connect
Ericsson EPOC Connect installs a number of menu items, shortcuts and the
My Ericsson icon in your Windows environment.
• You can access all of Ericsson EPOC Connect’s features as well as the
online help and this user guide from the Start menu, by selecting
Start|Programs|Ericsson EPOC Connect.
• The My Ericsson icon on your desktop is similar to the My Computer
icon. Double-click on My Ericsson to display the files on your MC 218.
Right-click on the My Ericsson icon to display a menu of Ericsson EPOC
Connect options.
Tip! You can change various Ericsson EPOC Connect settings by right-
clicking on My Ericsson and selecting Properties.
The My Ericsson icon is also displayed in Windows Explorer with
My Computer.
By double-clicking the My Ericsson icon on the PC desktop you open the My
Ericsson window. Here you can perform backups by choosing the Back up
command on the EPOC menu. See the section on backing up your MC 218
WHERE CAN I FIND ERICSSON EPOC CONNECT?
To Next Page
Loading...