81 Setting Up the Internet and Message Programs
4. Tap the Save to outbox button on the toolbar.
5. Tap the Outbox icon in the left-hand folder list, then tap Send
on the
toolbar and select Email. The Connect to Internet dialog will appear, as
pictured previously. If all the details are correct, select OK to start the
connection. If any of the settings are incorrect you will need to change
them in the Control panel on the Desktop screen.
Note! The Message program will automatically disconnect from the Internet
once it has sent the e-mail message.
To get the message from your mailbox:
1. Wait for a few minutes to give the message time to arrive. Then tap Open
mailbox on the toolbar.
2. When the Connect to Internet dialog appears, select OK.
3. A list of the messages currently in your mailbox will appear in the Remote
mailbox. Select the test message and tap Copy (inbox) on the toolbar, or
use the Move to inbox command on the Transfer
menu.
Note! If you experience any difficulties connecting using the Message
program, select Help on Message on the Tools menu, then look for
information on the problem you are having in the Help topics. You can view
the list of topics that deal with problems by typing ‘troubleshooting’ as a
search clue with the Quick find button on the toolbar selected.
Tip! For more information on the Message program, see the appropriate
sections in this User’s Manual.
This test confirms that you can connect to your service provider correctly, and
send and receive e-mail.
Sending a test SMS message
To send a test SMS message:
1. Open the Message program, tap New on the toolbar and select SMS.
2. Enter the number of the phone you want to send the message to, followed
by your message, then use Save to outbox on the toolbar.
3. Make sure your phone and MC 218 are connected, and, where appropriate,
that the infrared port on your phone is activated, then use Send on the
toolbar, and select SMS.
…remove a modem from the list?
To remove any of the modems from the list of pre-defined modems:
1. Open the Modems section of the Control panel on the Desktop screen.
2. Select the modem you want to remove and tap Delete.
Tip! If you delete all the modems in the list, it will return to the original list of
pre-defined modems.
…change the modem speed?
You can change the speed at which your MC 218 communicates with your
HOW DO I...? MOBILE AND GENERAL USAGE
To Next Page
Loading...