73 Setting Up the Internet and Message Programs
Before connecting your MC 218 to the Internet, you need to prepare your
machine and software.
Preparing your MC 218 and software will require:
1. Making sure your Ericsson mobile phone is fitted with an infrared modem
– an attachable infrared modem is supplied with MC 218 (alternatively,
you can connect your MC 218 to a fixed line modem).
Note! The Ericsson GSM phones in the 600, 700, 800 series and in the A-, R-
and T-class are supported by the MC 218.
2. Correct positioning of the two infrared ports of the MC 218 and your
mobile phone (if applicable).
3. Choosing the type of modem you use (Ericsson Infrared Modem is the
default).
4. Setting the location you are dialling from (Mobile is the default).
5. Choosing the service provider you use to connect to the Internet.
6. Entering e-mail-specific settings in Message.
The following sections describe each of these stages in turn.
Tip! Each of the dialogs you use when setting up the new sections of the
Control panel on your MC 218 has a Help button. Tap this to find out more
information on what to put in each line of the dialog.
Connecting Your MC 218 to an Infrared Modem
Your MC 218 is prepared for infrared communication, if your Ericsson mobile
phone has a built-in infrared port and modem, or an attachable infrared
modem.
The username and
password you should
use to log in to your
mailbox.
From the administrator for
your e-mail account. This
will often be your Internet
service provider.
The name of the e-mail
server for incoming
messages. This is often
called the POP3 server.
From the administrator for
your e-mail account. This
will often be your Internet
service provider.
The name of the e-mail
server for outgoing
messages. This is often
called the SMTP server.
From the administrator for
your e-mail account. This
will often be your Internet
service provider.
OVERVIEW OF SETTING UP
QUICK SETUP FOR MOBILE USERS
To Next Page
Loading...