177 Record
To play back the entire sound file, tap the PLAY button, press the Spacebar, or
select the command on the Play menu.
Note! The loudspeaker is located in the spine of the machine, next to the
battery compartment and at the opposite end from the infrared window.
To play back only part of a sound:
• Use the pen to drag the cursor to the point where you want to begin
playing (or select Go to time on the Play menu and enter the start position
in minutes and seconds), then press PLAY. Playback begins from the
selected point. To pause playback, press PLAY again.
To adjust the volume:
• Use the pen or the up and down arrow keys to move the volume fader to
one of the volume settings, or set it to Min to turn off the sound
completely.
To play back a sound recording several times in succession:
• On the Tools menu, select Repeat sound and set the number of
occurrences as appropriate.
You can use the MC 218 as a dictating machine by using the external buttons
to record and play back voice notes. A ‘voice note’ is a sound recording you
can create and play back without starting the Record program, switching the
MC 218 on, or even opening the MC 218 case.
Voice nots are stored as sound files. You can use the files in the Record
program, like other sound files.
Slide back the cover to reveal the voice note buttons. To avoid accidental
recordings, replace the cover when you are not using the buttons.
= Record = Rewind = Play
PLAYING SOUNDS
RECORDING VOICE NOTES
Record Rewind Play Indicator LEDCover
To Next Page
Loading...