Message 106
To forward a fax:
1. Highlight the fax you want to forward in the Folder view, or open the fax.
2. Select Forward on the Message menu, or tap the Reply/f’ward button on
the toolbar and select Forward.
3. You can now enter the fax number and other details, and forward the fax in
the same way you would forward an e-mail. See “Forwarding an e-mail”.
Resending a fax
Once you have sent a fax, it is moved to the Sent folder until you delete it. You
can resend a fax from this folder; and it will be copied to the Outbox folder to
be sent again the next time you connect.
To resend a fax:
1. Open the Sent folder and highlight the fax you want to resend.
2. Use the Copy and Paste commands on the Edit menu to copy the message
and paste it into the Outbox.
3. Proceed to send the fax from the Outbox as normal.
SMS messaging allows you to send and receive short messages between
mobile phones. You can use the Message program to create these messages,
then send them via your phone.
Before sending SMS messages, you should check the following:
• That your phone is set up to send and receive SMS messages. You will be
able to find out how to do this by consulting your phone manual and phone
dealer or network operator.
• That you are set up to send and receive SMS messages in the Message
program. Instructions on setting up to send and receive SMS messages are
described in detail in the “Setting Up the Internet and Message Programs”
chapter.
Writing and sending SMS messages
To write an SMS message:
1. Select Create new SMS
on the Message
menu, or tap the New button on
the toolbar and select SMS.
2. Type the number of the phone you are sending the message to in the To:
line, then enter the text of your message.
CREATING, SENDING & RECEIVING SMS MESSAGES
To Next Page
Loading...