87 Setting Up the Internet and Message Programs
3. Tap on the Dial out page, and enter the code you need to dial to disable
Call Waiting in the bottom line.
…change the dial out code?
To change the dial out code set for the current location:
1. Open the Dialling section of the Control panel on the Desktop screen.
2. On the Location page, select your current location and tap Edit.
3. On the Dial out page, enter:
• The number you need to dial before making a local call, and
• The number you need to dial before making a long distance call.
Note! If you would normally pause after dialling the dial out code, put a
comma after the number. If you would normally wait for a proceed tone after
dialling the dial out code, put a tick in the Wait for proceed tone box on the
Dial settings page.
…use pulse dialling?
If you are on a telephone exchange where you cannot use tone dialling (the
standard setting used by the MC 218 communications software), you can set
your modem to use pulse dialling.
To use pulse dialling:
1. Open the Dialling section of the Control panel on the Desktop screen.
2. On the Location page, select the location you are currently dialling from
and tap Edit.
3. On the Dial settings page remove the tick from the:
• Tone dial inside box if you are on an internal exchange which does not
support tone dialling.
• Tone dial outside box if the external telephone exchange you use does
not support tone dialling.
…use a chargecard?
You can set up the MC 218 communications software so that it automatically
enters chargecard details as it dials a number.
To use a chargecard:
1. Open the Dialling section of the Control panel on the Desktop screen.
2. On the Location page, select the location you want to use the chargecard
for and tap Edit.
3. On the Chargecard page, put a tick in the Use a chargecard box.
4. Either select a chargecard which sounds close to the one you use and tap
the Options button and select Edit, or tap the Options button and select
New.
5. On the Details page:
• Enter your account number.
• Enter and confirm your PIN.
6. On the Rules page:
• Use the letters (representing your chargecard details such as account
number and PIN) to specify the order information should be sent in
when dialling local, national and international phone numbers.
To Next Page
Loading...