Message 90
Internet service provider or corporate network.
When you are connected you can move or copy e-mail messages from a
remote mailbox to the Local inbox, and once they have been moved or copied,
you can read, reply to and forward these messages without being connected.
Any messages you reply to or forward can be sent when you connect again.
While connected you can send any faxes you have prepared; you can send all
the faxes in the Outbox, or you can send individual faxes. You can also
receive faxes onto your machine, either from another person who needs to
send you a fax, or by dialling a faxback service.
Starting the Message Program
Note! Before you can connect using the Message program you need to enter
the setup information required to transfer messages in the Control panel. For
further information about this, refer to the “Setting Up the Internet and
Message Programs” chapter.
To start the Message program:
1. On the Program icon bar, tap the Message program
icon and the Message
program opens, in the Folder view.
Once you have finished using the Message program, close it by selecting the
Close command on the File menu in the Folder view.
To Next Page
Loading...