ERS AirCool plus - Voltage Selection

ERS
®
Manual / AirCool
®
plus -System / SP72_TA1C8 / -55°C +200°C / Ver. 02.02 18
SP72 rear panel
Voltage
selection
terminal
SP72 front panel
5.2 Voltage selection
The ERS
®
AirCool
®
plus system is prepared for operation at input voltage:
100V, 115V, 200V and 230V.
Voltage slelction at SP72
Disconnect from mains before opening cover!
Danger
1.
Fig. 5.2a Controller SP72 with opened cover
2. Open the cover!
3. Make connection according to mains voltage.
Fig. 5.2b Voltage selecting terminal
230V 200V 115V 100V
Select voltage
i
advice
The standard voltage setting (state at delivery) is 230V.