ERS
®
Manual / AirCool
®
plus
-System / SP72_TA1C8 / -55°C +200°C / Ver. 02.02 4
2 Safety symbols
Safety precautions (in the manual represented by safety symbols) must be observed
during all phases of operation, service and repair of this equipment. Failure to comply
with these precautions or with specific warnings elsewhere in this manual may impair
the protections provided by the equipment. In addition it violates safety standards of
design, manufacture and intended use of the instrument. ERS
®
electronic GmbH
assumes no liability for customers failure to comply with these requirements.
Warnings precede potentially dangerous procedures throughout this manual.
Instructions contained in the warnings must be followed.
Symbols used on the equipment and in the manual
Danger
Caution
Calls attention to a procedure, practice or condition that
could possibly cause bodily injury or death.
Calls attention to a procedure, practice or condition that
could possibly cause damage to equipment.
Calls attention to a procedure, practice or condition that
requires special attention by the reader.
The functional capability of the system can be reduced.
Advice