ERS AirCool plus - Initial Operation Checks and Problems

ERS
®
Manual / AirCool
®
plus -System / SP72_TA1C8 / -55°C +200°C / Ver. 02.02 25
6 Initial operation
The following problems could occur at initial operation:
The system is switched on and shows absolutely no reaction.
ÿ Main power switch is not pressed correctly.
ÿ A fuse might be faulty.
The chuck does not cool down although low temperature is set and no error message
appears.
ÿ There is no air supply.
ÿ Some air tube is bent or squeezed.
i
ÿ Make sure that all requestet operating conditions are
ensured!
ÿ Check all power and air connections!
ÿ Make sure that no air tube is bent or squeezed.
ÿ Make sure that the right voltage is selected before
switching on!