ERS AirCool plus - Request Commands

ERS
®
Manual / AirCool
®
plus -System / SP72_TA1C8 / -55°C +200°C / Ver. 02.02 37
9.6 Request commands
RC Request actual chuck temperature [1/10 °C resolution]
Response: Cvxxxx
i.e. C+1234 says: Chuck temperature is +123.4°C
Rc Request actual chuck temperature [1/100 °C resolution]
Response: Cvxxxxx
i.e. C+12345 says: Chuck temperature is +123.45°C
RE Request error status
Response: E0yy
i.e. E003 says: Error 03 has occurred
the error status numbers are the same as displayed at the set
temperature display of the front panel (see chapter 7.1 for more
information)
RI Request status of chuck
Response: In
n = 0 Set temperature reached and controlling
n = 1 Heating up chuck
n=2Coolingdownchuck
n=8Error
RL0 Request status of keyboard lock (see SL command)
Response: L0y
i.e. L02 says: keyboard lock is active with Local key disabled
RO Request operation mode (see SO command)
Response: Oy
y = 0 unit is off (not supported in SP72 software)
y = 1 normal operation
y = 2 standby mode active
y=3defrostmode
y = 4 save mode
RR Request deviation range (see SR command)
Response: R+xx-yy
+xx = max. positive deviation in 1/10°C
-yy = max. negative deviation in 1/10°C
i.e. R+05-08 deviation ranges from
(Set temp. + 0,5°C) to (Set temp. - 0,8°C)
RT Request set temperature [1/10 °C resolution]
Response: Tvxxxx
i.e. T-0105 says: Set temperature is -10,5°C