ERS AirCool plus - Error Messages and Troubleshooting

ERS
®
Manual / AirCool
®
plus -System / SP72_TA1C8 / -55°C +200°C / Ver. 02.02 42
RH<CR><LF> Request Status of Hold Mode
Response: Hy
y = 0: Hold-Mode not active
y = 1: Hold-Mode active
See chapter for details about Hold-Mode.
RE<CR><LF> Request error status
Response: E0yy
i.e. E003 says: Error 03 has occurred
The error status numbers are the same as displayed at the
set temperature display of the front panel (see chapter 7.1
for more information).