Chapter 1: DS850 Overview 12
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
Cloth and isopropyl alcohol: Used to clean the rollers. Quantity: one bottle.
Small white adhesive labels, ½ inch wide: Use these labels to cover stray marks on
the ballots. Only use labels from ES&S. Quantity: 12 sheets.
USB flash drives: These must be FAT32 formatted drives. Depending on the number
of ballots processed, you may need multiple drives to transfer all of the ballot image
data. Election results data will fit on a single drive. The minimum size is 1GB and the
maximum is 8 GB. Quantity: 6
Marking Devices: Although the DS850 reads a wide variety of marking devices,
ES&S recommends that you use the following devices:
Audit log printer ribbon (ES&S part # 4778)
Quantity: 1 per printer
Report Printer Toner Cartridge (ES&S part # 6826)
Quantity: 1 per printer
Touch screen cleaning kit.
Warning: The flash drives you use in the DS850 must be used for the election process
only. Using the drives for anything other than the election process violates security
practices.
VL Ballot Pen (ES&S part # 6100).
The pen is a BIC Grip roller ball with black
ink and a 0.7 mm tip.
Absentee Pen (ES&S part #00500)
Easily fits into an envelope for mailing.
Absentee Pencil (ES&S part # 00540)
Red, 0.125 point
To Next Page
Loading...