Chapter 5: Pre-Election Day Tasks 62
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
2. From the Election menu, press
Setup to access the Setup
screen.
3. On the Setup screen, press Clear
and Initialize. This displays the
Searching for EQC Media Device
pop-up screen.
4. Insert a valid (for the election)
EQC Media Device flash drive
into one of the scanner’s USB
ports. The previous pop-up
screen is temporarily replaced by
a Detecting inserted device
pop-up screen. Then, the
Qualification Code screen
appears.
5. Enter the Qualification Code
and then press Accept.
Reference: See Using USB Media Devices for instructions.
To Next Page
Loading...