27
D5 Gas Isolating Valve
A gas isolating valve must be installed in the gas line as close to the appliance as possible. Fix it in a
convenient position to allow it to be closed o quickly and easily during normal operation. Take into
consideration access to this valve once the wall linings are on. This will also allow for easier servicing in
the future.
END OF SECTION D
By the end of this section, you should have:
□ An unlined cavity with 230/240V AC supply that the appliance can be plugged into an
electrical isolating switch that is accessible once the appliance is installed
□ A suitably sized gas supply to the right hand side of the appliance with a pressure test
point, ready to be connected once installed
□ Network cable installed, ready for plugging into appliance, regardless of being connected
to Internet router/network or not
To Next Page
Loading...
