8
A
Product Description and Installation Process
A1 Product description
The Escea DS-Series gas fire is a room sealed gas appliance designed to be built into a false cavity. The
appliance is flued using co-linear flexible aluminium flue and Polypro plastic piping beyond 4m. The
user will control their fire with the Radio Frequency (RF) remote that will normally be located in it’s
wall mount cradle. In addition to the RF remote the appliance has a single auxiliary On/O button on
the unit. When not in operation it is in a standby mode unless it is physically isolated from the mains
supply.
A2 Recommended Install Process
The following diagram illustrates the steps required to install your gas fire.
The sequence in which you choose to do these tasks will vary depending on your individual scenario.
Please read these instructions fully before proceeding with the installation.
False Cavity Installation
Create the Cavity Install electrical / gas
connections, ue
system, and replace
Finish installation
and t fascia
Section B Section C, D Section F
To Next Page
Loading...
