ETAS ES930.1 - Environmental Conditions; Hardware; System Requirements

ETAS Technical Data
ES930.1 - User Guide 90
13.8 System Requirements
13.8.1 Environmental Conditions
13.8.2 Hardware
Operating the ES930.1 module requires a DC voltage supply of 7 V to 29 V and
operating the Half-bridges (power stages) of the ES930.1 requires a DC voltage
supply of 7
V to 32 V.
13.8.2.1 PC with one Ethernet Interface
A PC with one open Ethernet interface (100 Mbit/s, full duplex) with RJ-45 con-
nection is required.
Requirement to ensure successful Initialization of the Module
13.8.2.2 To deactivate the Power saving Mode
Choose in System Control Center / Device Manager / Network Adapter the
used network adapter by double-click. Deactivate the "Allow the computer to
turn off this device to save power" option in the "Power Management" register.
Confirm your configuration.
Operating temperature range -40 °C to +70 °C
-40 °F to +158 °F
Storage temperature range
(module without packaging)
-40 °C to +85 °C
-40 °F to +185 °F
Altitude Max. 5000 m / 16400 ft
Protection class IP30
Contamination level 2
CAUTION
Loss of features as defined by IP30!
Do not open or change the module!
Work on the module must only be carried out by specialist, qualified person-
nel.
NOTE
The module is suitable for use in interiors, in the passenger cell or in the trunk
of vehicles. The module is
not suitable for installation in the engine compart-
ment and similar environments.
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!